Preliminary Instructions - Akai TEM-35CHSABH Instruction Manual

Preliminary Instructions

How to insert the batteries
Remove the cover from the battery compartment,
by sliding it in the direction of the arrow. Insert
the new batteries, ensuring that the (+) and (-)
directions are correct.
Refit the cover by sliding it into place.
• Use 2 LRO 3 AAA (1.5V) batteries. Do not use
rechargeable batteries. Replace the old batteries
with new ones of the same type when the display
is no longer legible.
The remote control batteries must be disposed of
in accordance with the applicable laws in force in
the country of use.
Refer to picture 1:
• When you insert the batteries for the first time
in the remote control or if you change them, you
will see a DIP switch under the back cover.
DIP switch on position Function
C The display is adjusted in degree Celsius
F The display is adjusted in degree
Fahrenheit.
COOL The remote control is adjusted in only
cooling mode
HEAT The remote control is adjusted in only
heating mode
NOTE: After adjusting the function, you need to
take out the batteris and repeat again the
procedure described above.
After Sales Support 1300 886 649
10