Table of Contents
Advertisement
(Continued from previous page.)
Setting
EDIT PORT
NAMES
RESTORE
DEFAULT
VALUES
CLEAR THE
NAME LIST
ACTIVATE
BEEPER
To help remember which computer is attached to a particular port,
every port can be given a name. This function allows the
Administrator to create, modify, or delete port names.
Note: Only the Ports currently chosen for the LIST view on the
main OSD screen (see page 23), show up here.
To Edit a port name:
1. Use the Navigation Keys to move the highlight bar to it, then
press [Enter].
2. Key in the new Port Name, or modify/delete the old one. The
maximum number of characters allowed for the Port Name is
12. Legal characters include:
All alpha characters: a–z; A–Z
All numeric characters: 0–9
+ - / : . and Space
Case does not matter; OSD displays the Port Name in all
capitals no matter how they were keyed in.
3. When you have finished editing, press [Enter] to have the
change take effect. To abort the change, press [Esc].
This function is used to undo all changes and return the setup to
the original factory default settings (see OSD FACTORY DEFAULT
SETTINGS, page 44) – except for the Names and QUICK VIEW
settings that were assigned to the Ports. These latter two are
saved.
This function clears the port name list.
Choices are Y (for On), or N (for Off). When activated, the beeper
sounds whenever a Port is changed; when activating the Auto
Scan function (see F7 SCAN, page 29); or an invalid entry is made
on an OSD menu. The default is Y.
Chapter 4. OSD Operation
Function
(Continues on next page.)
27
Advertisement
Table of Contents
