Edge-Core ES4308-PoE Management Manual page 20

Configuring the Switch
• Frame Type – Either "Tagged" or "All." "Tagged" means that the port will only
receive VLAN-tagged frames. When set to "All," the port will also receive untagged
frames.
• PVID – The VLAN ID assigned to untagged frames received on the interface.
Outgoing frames are tagged unless the frame's VLAN ID is the same as the PVID.
When the PVID is set to "None," all outgoing frames are tagged. (Default: 1)
Trunk Information
• Trunk – The trunk label. "T1" through "T4" are used as trunk labels.
• Type – All trunks and ports on this switch are 10/100/1000Mbps
• Trunk Status – Indicates the speed and duplex setting of the trunk. This can be
changed on the TRUNKS > Settings page.
• 10hdx: 10 Mbps half duplex.
• 10fdx: 10 Mbps full duplex.
• 100hdx: 100 Mbps half duplex.
• 100fdx: 100 Mbps full duplex.
• 1000fdx: 1000 Mbps full duplex.
• Ports – The ports that are members of the trunk.
VLAN Information
• VLAN ID – A number in the range 1 - 4094 which identifies the VLAN.
• VLAN Member – A list of the ports that are members of the VLAN. By default, all
ports are members of VLAN 1.
3-6