Disassembly Instructions - Mitsubishi Electric MSZ-GE22VA-A1 Service Manual

11

DISASSEMBLY INSTRUCTIONS

<"Terminal with locking mechanism" Detaching points>
The terminal which has the locking mechanism can be detached as shown below.
There are two types (Refer to (1) and (2)) of the terminal with locking mechanism.
The terminal without locking mechanism can be detached by pulling it out.
Check the shape of the terminal before detaching.
(1) Slide the sleeve and check if there is a locking lever or not.
Sleeve
Locking lever
11-1. MSZ-GE22VA MSZ-GE22VAD MSZ-GE25VA
MSZ-GE35VA MSZ-GE35VA2 MSZ-GE35VAD MSZ-GE42VA
MSZ-GE50VA MSZ-GE50VA2 MSZ-GE50VAD
OPERATING PROCEDURE
1. Removing the panel
(1) Remove the horizontal vanes.
(2) Remove the screw caps of the panel. Remove the
screws of the panel.
(3) Unhook the lower part ( ) of the panel.
(4) Hold the lower part of both ends of the panel and pull
it slightly toward you, and then remove the panel by
pushing it upward.
OBH531E
Slide the sleeve.
Pull the terminal while
pushing the locking
lever.
Photo 1
45
(2) The terminal with this connector has the
locking mechanism.
Hold the sleeve, and
pull out the terminal
slowly.
Connector
MSZ-GE25VAD MSZ-GE33VA
NOTE: Turn OFF power supply before disassembly.
PHOTOS
Horizontal vanes
A
Screws of the panel
MSZ-GE42VAD
Front panel