Ringing Tone - ASCOM Eurit 4000 Operating Instructions Manual

Advanced features

Ringing tone

Your Ascom Eurit 4000 has a wide range of different ringing tone melodies. The
volume can be individually adjusted. The increasing option can be linked with the
volume, in which case the ringing tone starts at the quietest level and increases as far as
the set volume.
A user prompt can be recorded for each user. Record your own user prompt. Whenever
there is a call for you, you will hear not only the ringing tone melody but also your user
prompt (your name spoken out loud) telling you that the incoming call is for you.
If you have provided entries in the phonebook with name prompt (see section entitled
"Phonebook – Creating a new entry – Name prompt"), you can integrate the name
prompt into the ringing tone sequence. The ringing tone sequence is melody – user
prompt – name prompt. You can define whether or not you want your telephone to
play, for example, just the ringing tone melody and the name prompt whenever there is a
call.
The settings in the "Ringing tone" menu are user-dependent.
Setting the ringing tone melody and ringing tone volume
Press the user key until your name appears.
Melody Select the "Melody" line and press the OK key. Select a melody from the list of
ringing tone melodies and press the OK key.
Volume Select the "Volume" line and press the OK key. Select the volume by pressing the
Fox key below "–" or "+" and press the OK key.
Increasing Select the "Increasing" line and press the OK key.
From the pop-up window, select "ON" and press the OK key.
save Press the Fox key below save.
If the volume is set to "0" (mute), the status symbol
and the LED illuminates.
Make sure that a different melody is selected for each user. This makes it possible to
distinguish audibly between incoming calls.
Whenever there is an incoming call, you can change the volume of the ringing tone
using the plus or minus key.
20324744en_ba_a0
appears in the normal display
80