ASCOM Eurit 4000 Operating Instructions Manual page 14

Getting started
Connecting the telephone connecting lead and the plug-in power supply unit
Under no circumstances should you plug the connecting lead of the plug-in
power supply unit into the telephone connecting socket as this might damage
the telephone. Be sure to plug the telephone connecting lead and the plug-in
power supply unit into the correct sockets.
Plug the shorter of the two connectors on the telephone connecting lead into the socket
on the underside of the telephone
Press the cable into the cable groove in order to relieve the strain on the connector
a thin, flat object to press the cable under the retaining lugs.
Plug the connecting lead of the plug-in power supply unit into the socket on the
underside of the telephone
Press the cable into the cable groove in order to relieve the strain on the connector
a thin, flat object to press the cable under the retaining lugs.
Turn the telephone over and stand it on its legs. Place the handset on its cradle.
Plug the larger connector at the other end of the telephone connecting lead into the wall
socket or NTBA.
Plug the plug-in power supply unit into the wall socket
which is marked with a telephone symbol.
which is marked with a plug-in power supply unit symbol.
9
.
. Use
. Use
20324744en_ba_a0