Table of Contents
Advertisement
Getting started
Quick reference guide - handset lifter
RING ON/OFF
Press to turn the ring detector on or off. When the ring detector is
off, the cordless headset does not ring (page 12).
Switch hook presser adjustment knob
Adjusts the position of the switch hook presser
(page 8).
Small lifter pad
Holds the earpiece of the corded telephone
handset.
STATUS light
On in red when the ring detector is off (page 13).
On in blue when the ring detector is on and
the headset not in use (page 13).
Flashes in blue four times every three seconds
when the ring detector detects an incoming
call (page 13).
Flashes in blue slowly when the switch
hook presser is raised and you are on a call
(page 13).
Internal ring detector
Detects the telephone ringer and sends a
ring tone to the headset earpiece.
Adhesive tape
Remove the protective strips before
attaching the lifter to the telephone base.
2
Advertisement
Table of Contents
