Adjust The Corded Handset Audio - AT&T TL7100 User Manual

Getting started
Handset lifter installation

Adjust the corded handset audio

1. Make sure that LIFTER MODE light on
the headset base is on. Press the MODE
button on the headset base to change
the mode.
2. Lift the corded handset to release
the switch hook. Place the corded
handset aside.
3. Place the headset earpiece (AT&T model TL7610/
TL7611) on your ear.
4. Press ON/
tone. If there is no dial tone or the dial tone is
unclear, slide the LIFTER AUDIO ADJUST switch
on the side of the headset base from A to G until
the dial tone is clear.
on the headset to listen for a dial
OFF
6