Connecting To A Power Outlet And Turning Power On And Off; Loading Fanfold Paper - Star LC-1511 User Manual

13
Cut-sheet
Feuilles séparées
Einzelblätter
Carta in fogli
Fanfold
Papier continu
Endlospapier
Carta in modulo continuo
Connecting to a power outlet and
turning power on and off
Plug the power cord of the printer into a standard
power outlet whose voltage matches the power
rating noted on the label affixed to the bottom of
your printer.
Caution!
If the voltage marked on the bottom of your printer
does not match the voltage from the outlet you are
using, do not plug in the power cord. Contact your
dealer for assistance.
Set the switch on the left of the printer to 1 (ON)
to turn power on, and to 0 (OFF) to turn power
off.
Caution!
Whenever you turn off the power, wait for at least
five seconds before turning it back on. Otherwise you
may damage the printer. We also recommend that
you unplug the printer from the power outlet
whenever you do not plan to use it for long periods.
Because of this, you should locate the printer so that
the power outlet it is plugged into is nearby and easy
to access.
At this point you may want to perform a test of the
printer to make sure it is working properly. See
"Testing the printer" on page133 for details on how
to perform tests.

Loading fanfold paper

This section tells you how to load fanfold paper. Note
that you can also use cut-sheet paper. For details on
using other types of paper, see "Paper Handling" on
page 119 of this manual.
Remove the paper guide from the printer.
Make sure printer power is turned off.
Set the release lever to the fanfold position.