Table of Contents
Advertisement
D Media switch lever
Switch the position of this lever according to the type
of ink ribbon being used.
Rear
A
Equipotential ground terminal connector
Connects to a ground (equipotential) plug to bring the
various parts of the system to the same potential.
B NTSC/PAL switch
Switch the position as follows according to the video
signal being used.
When using NTSC video signals, set the switch to the
up position.
When using PAL video signals, set the switch to the
down position.
C VIDEO IN/VIDEO OUT (composite video signal
input/composite video signal output) connectors
(page 13)
VIDEO IN connector: Connects to video equipment
with composite video signal output connectors.
VIDEO OUT connector: Connects to video
equipment with composite video signal input
connectors.
D t INPUT (RGB/YPbPr/SYNC video signal
input) connectors (page 13)
Connects to video equipment with RGB/YPbPr signal
output connectors.
E T OUTPUT (RGB/YPbPr/SYNC video signal
output) connectors (page 12)
Connects to video equipment with RGB/YPbPr signal
input connectors.
F RS-232C connector (page 14)
Connects to a computer for controlling the printer.
10
Location and Function of Parts and Controls
G - AC IN connector (page 12)
Connects to the power cord.
H
REMOTE 2 connector (stereo mini jack)
(page 14)
Connects to an RM-91 Remote Control Unit (not
supplied) or an FS-24 Foot Switch (not supplied).
I
REMOTE 1 connector (page 14)
Connects to an RM-5500 Remote Control Unit (not
supplied) for wired remote control.
J S-VIDEO IN/S-VIDEO OUT (S-Video input/S-
Video output) connectors
S-VIDEO IN connector: Connects to video
equipment with S-Video signal output connectors.
S-VIDEO OUT connector: Connects to video
equipment with S-Video signal input connectors.
Monitor Display
When the printer is connected to a video monitor and
turned on, the following screen is the first screen that
appears on the monitor. (This screen is referred to as the
"normal" screen in this document.)
When the MENU button is pressed, the menu screen is
displayed.
For detailed information on the menu screen, see "Menu
Tree" on page 41.
A C (caption) display section
C is displayed when the printer is set to print a
caption.
B Ink ribbon type and remaining ink ribbon display
section
Displays the ink ribbon type and the remaining
amount of ribbon (indicates the number of printouts
that can still be made with the ribbon).
C Message display section
Usually messages are displayed on the top line of the
screen.
Hide quick links:
Advertisement
Table of Contents
