Table of Contents
Advertisement
b) When multiple reduced images are being captured, after
the last image is captured, the printer goes to the next
memory page.
Adjusting the Contrast of the Printer
Window Display
When it is hard to read the contents of the printer window
display, adjust the contrast using the menu.
1
Display the SYSTEM SETUP menu from the
PRINTER SETUP menu.
2
Select the LCD-CNTR. item, then adjust the contrast
of the printer window display.
Adjust the contrast by pressing
the < or , button.
Note
When the slider is set to the far left, the setting will appear
as OFF, and the printer window display will remain blank.
However, error messages will still be displayed.
Setting the Tray Light
Select the function of the printer's tray light.
1
Display the SYSTEM SETUP menu from the
PRINTER SETUP menu.
2
Select TRAY LIGHT, then select the tray light
function.
Function
The tray light shines for
approx. 5 seconds after
printouts eject.
The tray light is always on.
The tray light is always off.
Setting the Cleaning Message
Display Function
Select whether to display a message requesting thermal
head cleaning. This message appears for approximately 6
seconds after you press the ! POWER switch to turn on
the printer.
1
Display the SYSTEM SETUP menu from the
PRINTER SETUP menu.
2
Select CLEAN DISP., then select whether to display
the message.
When you want to
Not display messages that
request thermal head
cleaning.
Display messages that
request thermal head
cleaning.
Selecting Whether the Operation and
Error Tones Sound
Whenever you press a button on the front door, the
operation tone sounds (one time). When an error occurs,
the alarm tone sounds (three times). You can turn these
tones on and off using the menu.
1
Display the SYSTEM SETUP menu from the
PRINTER SETUP menu.
2
Select the BEEP item, then select whether or not the
operation and error tones sound by pressing the < or
, button.
When you want to
Sound the tones.
Disable the tones.
Setting (abbreviated
display/display when
selected)
M1/MODE1
M2/MODE2
M3/MODE3
Setting
OFF
ON
Selection
ON
OFF
Making Various Settings
61
Hide quick links:
Advertisement
Table of Contents
