Table of Contents
Advertisement
2
Perform adjustments according to the printout
obtained by using the V START, V WIDTH, H
START and H WIDTH items.
Item to be used for eliminating the vertical
line at the right side
Item to be used for eliminating the horizontal line
on the bottom
Item to be used for eliminating the vertical
line at the left side
Item to be used for eliminating the horizontal line
at the top
When a horizontal black line is produced on
the printout
To eliminate a horizontal black line produced at
the top:
Adjust the top position of the image to be printed
using the V START item.
Note
A black line may apper at the bottom while you
adjusting the top. You can eliminate it using the V
WIDTH item.
To eliminate a horizontal black line produced at
the bottom:
Adjust the bottom position of the image to be printed
using the V WIDTH item.
When a vertical black line is produced on the
printout
To eliminate a vertical black line produced on the
left side:
Adjust the left position of the image to be printed
using the H START item.
Note
A black line may apper on the right side while you
adjusting on the left side. You can eliminate it using
the H WIDTH item.
To eliminate a vertical black line produced on the
right side:
Adjust the right position of the image to be printed
using the H WIDTH item.
To reset the values to defaults
For H START, H WIDTH, V START and V WIDTH
items, you can reset the values to defaults in pairs.
To reset the values for vertical settings, position the
cursor at either V START or V WIDTH, and then
press the < and , buttons simultaneously.
To reset the values for horizontal settings, position the
cursor at either H START or H WIDTH, and then
press the < and , buttons simultaneously.
Screen position and size settings adjusted in the
WINDOW SETUP menu are stored individually for
each input signal type (SDTV, 1080i, 720p)
configured with SD/HD SEL in the HDTV SETUP
menu. Therefore, the default setting values differ as
follows for each input signal type.
Input
H
signal
WIDTH
SDTV
688
(NTSC)
SDTV (PAL) 688
1080i
1920
720p
1280
To check the adjustment result
Print to check that no black frame appears on the printout,
that the image is not partially cut, and that no black line
appears.
Fitting the Printout to the Paper
1
Display the WINDOW SETUP menu from the
LAYOUT SETUP menu.
Adjusting the Color and Picture Quality
H
V
V
START
WIDTH
START
0
472
0
0
556
0
0
1080
0
0
720
0
49
Hide quick links:
Advertisement
Table of Contents
