Sony UP-25MD Instructions For Use Manual page 24

To set the printout quantity by using the PRINT
QTY button
1
Press the PRINT QTY button.
The following screen appears.
If you do not perform any operation after you press
the PRINT QTY button, the currently set number of
copies appears for a few seconds, after which it
disappears.
Currently selected number of copies
2
Press the PRINT QTY button until the desired number
appears, while the screen shown in step 1 is displayed.
Repeatedly pressing the PRINT QTY button increases
the number up to a maximum of 9. When the number
reaches 9, if the button is pressed again, it goes back
to 1. Or repeatedly pressing the , button also
increases the number up to a maximum of 9. When the
number reaches 9, if the , button is pressed again, it
goes back to 1.
Press the PRINT QTY button or , button until the
desired number appears.
24
Making Full-Size Image Printouts
2 1, 2
To decrease the number of copies
While the screen which appears in step 1 is displayed,
press the < button. Each time you press the < button,
the number decreases. When the number reaches 1, if the
< button is pressed again, it goes up to 9.
Setting the printout quantity using the menu
1
Display the PRINTER SETUP menu according to the
operations of step 1 described in "Making Printouts
with the Desired User Set Number" on page 23.
2
Select PRINT QTY by pressing the M or m button.
Highlight PRINT QTY in green by pressing the M
or m button.
3
Select the desired number of copies by pressing the
< or , button.
When you want to
Decrease the quantity.
Increase the quantity.
Display the desired number of copies
by pressing the < or , button.
4
Press the MENU button.
The normal screen appears.
Note
Do not leave more than 10 sheets of printouts on the paper
tray. Doing so may cause a paper jam. Even if fewer than
10 sheets of printouts have been accumulated on the paper
tray, the printer may stop printing for various reasons and
the message "REMOVE PRINTS" appears. In such a case,
remove printouts accumulated on the paper tray. The
printer will start to print remaining copies automatically.
Button
<
,