Table of Contents
Advertisement
Natural Gas Conversion
continued
For Main tube burner and Side burner Conversion Only
You will need to adjust the High Flame setting screw when converting the grill from Propane to
Natural Gas. Please follow the steps as detailed below
1. Remove each Control Knob of main tube burners and side burner by loosing the socket head grub
screw holding it to the Valve stem.
2. Turn the valve to the IGNITE/HI position on the Control panel and then use a screwdriver to turn
the High Flame Set Screw approximately ½ a turn counterclockwise.
3. Check that burner operates at the new high flame setting - it may be necessary to adjust the
screw setting slightly to get the ideal burner flame height.
39
Hide quick links:
Advertisement
Table of Contents
