Table of Contents
Advertisement
CAUTION: PLEASE TAKE OFF THE
WARMING RACK WHEN USING THE
ROTISSERIE BURNER. THE HIGH HEAT
COMING FROM THE ROTISSERIE
BURNER MAY CAUSE THE WARMING
RACK TO BEND.
WARNING: IMPORTANT!
BEFORE LIGHTING...
Inspect the gas supply hose prior to turning
the gas "ON". If there is evidence of cuts,
wear, or abrasion, it must be replaced prior
to use. Do not use the grill if the odor of gas
is present. Only the pressure regulator and
hose assembly supplied with the unit should
be used.
Operating Instructions
Grill Lighting Instructions
Never substitute regulators and hose
assembly for those supplied with the grill. If
a replacement is necessary, contact the
manufacturer
for proper replacement. The
replacement must be that specified in the
manual.
Screw the regulator (type QCC1) onto the
tank. Leak check the hose and regulator
connections with a soap and water solution
before operating the grill.
Continued
18
Hide quick links:
Advertisement
Table of Contents
