ADEMCO AVR960SV Instruction Manual page 20

SETUP (Continued)
Notes:
1. Programming the TIMER function does not acti-
vate it. See TIMER recording, page 24.
2. To record the time and date press the PRO-
GRAM button to display them.
3. When the preset START time is later than the
STOP time, the recording will be made into the
following day.
4. When the START time and STOP time are the
same, a recording will not be made.
5. When the programs for timer recording overlap
each other, recording will be switched to the
program with the later recording start time.
Example
Program number 1
Program number 2
Program number 3
When recording
number 3 is terminated, program
number 2 will be recorded for its
remaining time.
6. When two programs have the same start time,
the program number with the longest stop time
has priority.
19
1. Press the START/STOP button.
2. Press the UP or DOWN button repeatedly until
3. When the section to be corrected flashes on/off,
4. Press the UP or DOWN button to correct the set
5. After completing the correction, press the
Record
• • • • •
Time
of program
To correct information
the item to be corrected (Program number or
program event location of day of the week)
flashes on/off.
press the SET button.
• Press the SET button again so that only the
digit to be corrected flashes on/off.
information.
START/STOP button.