Configuring Ip Settings - EnGenius ENS202EXT User Manual

B N S
ASIC ETWORK ETTINGS

4.2.2 Configuring IP Settings

Configure the ENS202EXT LAN settings for the ENS202EXT using a static or dynamic IP address.
IP Network Setting Configure the network connection type using
either a static IP or dynamic IP.
IP Address Enter the LAN IP address of the ENS202EXT.
Subnet Mask Enter the subnet mask of the ENS202EXT.
Default Gateway Enter the default gateway of the ENS202EXT.
Primary DNS Enter the primary DNS address of the
ENS202EXT.
Secondary DNS Enter the secondary DNS address of the
ENS202EXT.
Use Link-Local Address Click to enable a link-local address for
the device.
IPv6 IP Address Enter the IPv6 LAN IP address of the
ENS202EXT.
IPv6 Subnet Prefix Length
the ENS202EXT.
IPv6 Default Gateway Enter the IPv6 default gateway of the ENS202EXT.
IPv6 Primary DNS Enter the IPv6 primary DNS of the ENS202EXT.
IPv6 Secondary DNS Enter the IPv6 secondary DNS of the ENS202EXT.
Click Apply to save the settings or Cancel to discard changes.
Enter the IPv6 subnet prefix length of
4-10
C IP S
ONFIGURING ETTINGS