Page 1
INSTRUCTION MANUAL Demolition Hammer HM1306 008264 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH SPECIFICATIONS Model HM1306 Blows per minute 1450 min Overall length 652 mm Net weight 15 kg • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Note: Specifications may differ from country to country.
12. Secure work. 22. Have your tool repaired by a qualified person. Use clamps or a vice to hold the work. It is safer This electric tool is in accordance with the relevant than using your hand and it frees both hands to safety requirements.
15. EXTENSION CORDS. Use only three-wire Installing or removing the bit extension cords which have three-prong 1. Bull point grounding-type plugs three-pole 2. Notched portion receptacles which accept the tool’s plug. 3. Tool retainer Replace or repair damaged or worn cord 4.
To replenish, remove the oil gauge with the wrench 23. clean and free to slip in the holders. Both carbon Use only Makita genuine oil. The use of any other oil brushes should be replaced at the same time. Use only may harm the tool.