Operation; Main Menu; Load A Crossover; Design A Crossover - Omnitronic DXO-26 User Manual

OPERATION

Switch the device on via the power-switch.
Press the Back/Next-buttons in order to navigate in the menu. Make your adjustments via the jog-wheel.
Press the Quit-button in order to leave a mode.

Main menu

By pressing the menu-button, you can enter the main menu. Select the desired submenu via the Back/Next-
buttons and confirm with the Enter-button.
Xover submenu

Load a crossover

Select the desired program via the jog-wheel and confirm with the Enter-button. You can only choose from
already stored programs.

Design a crossover

Select the desired setting via the jog-wheel and confirm with the Enter-button.
Types:
DXO-26: Stereo 2-way, Stereo 3-way, mono 4-way, mono 5-way, mono 6-way
DXO-24: Stereo 2-way, mono 3-way, mono 4-way
Please refer to the diagrams at the end of this manual.
Stereo-Link
Only for stereo programs.
The stereo link links two outputs depending on the crossover type. Please refer to the diagrams at the end of
this manual.

Store a crossover

You can save up to 10 programs. Press the ENTER-button for saving. Select the desired program number
via the jog-wheel. In order to move the cursor (e.g. for entering the next letter or correcting the last letter),
press the Back/Next-buttons.
Confirm your entry by pressing the ENTER-button.

Erase a crossover

Select the desired program via the jog-wheel and confirm with the Enter-button.

Safety options

The DXO-26/DXO-24 offers the possibility to protect the settings from unauthorized access.
Change only:
The parameters can be viewed but not be changed. Mute is possible.
Changes + View:
The parameters cannot be viewed and not be changed. Mute is possible.
Changes + Mute:
The parameters can be viewed. Changes and mute are not possible.
Everything:
Everything is locked.
In order to unlock:
Enter the passwort via the jog-wheel and confirm with the Enter-button.
20/24 DXO_26_24_V_1_0.DOC