Appendix A: Upgrading Road Warrior Firmware - Lorex Road Warrior RW2S SERIES Instruction Manual

APPENDIX A:
UPGRADING ROAD WARRIOR FIRMWARE
Occasionally, your Road Warrior may require a firmware update to enhance performance.
Firmware upgrades are available online at www.lorexcctv.com.
To upgrade your Road Warrior firmware:
Remove the SDHC memory card from the Road Warrior
1. Power off your Road Warrior. Remove the SDHC memory card.
2. Plug in the SDHC memory card into the memory card reader. Plug the memory card reader
into your PC's USB port.
Download the firmware
1. Go to www.lorexcctv.com
2. Download the latest firmware onto your computer. Make note of where you downloaded the
firmware file.
NOTE: The firmware file ends in a
Extract the firmware
• Double-click the zipped file and select the directory of where you would like to save the file.
Copy the firmware into the SDHC memory card
• Copy the firmware into the data folder of your Road Warrior's SDHC memory card. Eject the
SDHC memory card when the files have successfully copied into the data folder.
Reboot the Road Warrior
1. Unpower your Road Warrior.
2. Insert the SDHC memory card with the firmware into the Road Warrior.
3. Power on your Road Warrior. Wait approximately two minutes for the unit to upgrade. When
the firmware upgrade is complete, the REC, GPS and POWER LED will have a solid glow.
and search 'Road Warrior' on the website.
extension.
.arm

Appendix A: Upgrading Road Warrior Firmware

21