Before Operating Getting Started; Clock Setting; Stop/Clear; To Cancel A Programme During Cooking - Sharp R-242R Operation Manual

BEFORE OPERATING
Getting Started
Step
Plug the oven into a power point.
Ensure the door is closed.
1
Press the STOP/CLEAR pad so that
the oven beeps.
2

Clock Setting

* To enter the present time of day e.g. 11:34 (AM or PM).
Step
Press the TIMER/CLOCK pad.
1
Enter the hours by pressing the TIME
pads.
2
Press the TIMER/CLOCK pad.
3
Enter the minutes by pressing the
TIME pads.
4
Press the TIMER/CLOCK pad again.
5
This is a 12 hour clock.
Press the STOP/CLEAR pad and re-enter the time of day (Ex. 1:45).
If you wish to know the time of day during the cooking mode, press the TIMER/CLOCK pad. As long as your
fi nger is pressing the TIMER/CLOCK pad, the time of day will be displayed.

Stop/Clear

Press the STOP/CLEAR pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.

To Cancel a Programme During Cooking

Press the STOP/CLEAR pad twice.
R-242R(S) [01 EN].indd 5 R-242R(S) [01 EN].indd 5
Procedure
Procedure
Pad Order
Flashing four eights.
Only the dots will remain.
Pad Order
x1 x1
x3 x4
E – 5
Display
Display
12/22/09 8:14:16 AM 12/22/09 8:14:16 AM