Before Operating Getting Started; Clock Setting; Stop/Clear; To Cancel A Programme During Cooking - Sharp R-241K(W) Operation Manual

BEFORE OPERATING
Getting Started
Step Procedure
Plug the oven into a power point.
Ensure the door is closed.
1
Press the STOP/CLEAR pad so that the
oven beeps.
2

Clock Setting

* To enter the present time of day e.g. 11:34 (AM or PM).
Step Procedure
Press the CLOCK pad.
1
Enter the correct time of day by pressing
the numbers in sequence.
2
Press the CLOCK pad again.
3
This is a 12 hour clock. If you attempt to enter an incorrect clock time (Ex. 13:45),
in the display.
Press the STOP/CLEAR pad and re-enter the time of day (Ex. 1:45).
If you wish to know the time of day during the cooking mode, press the CLOCK pad. As long as your
finger is pressing the CLOCK pad, the time of day will be displayed.

Stop/Clear

Press the STOP/CLEAR pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.

To Cancel a Programme During Cooking

Press the STOP/CLEAR pad twice.
Pad Order
Pad Order
E – 5
Display
Flashing four eights.
Only the dots will remain.
Display
The dots will flash on and
off.
will appear