6
6.3.2
Operation flow
This section describes the operation flow from scanning documents until sending them, by operating the
Image Panel in the order of "scanning documents", "editing" and "specifying the destination".
Note
It is also possible to specify the destination first, and then scan documents.
1
Scan the document in the Data Source area.
–
To scan an original, position the original and then touch [Scan].
–
Specify the scan settings as required, and then start scanning. For details, refer to "Scan" on
page 6-8.
–
To use a document saved in a user box, select a user box from [User Box List], and select a
document to be loaded. For details, refer to "Load from user box" on page 6-9.
–
To use a document saved in an external memory, select the Media tab in the User Box List screen,
and then select a document to be loaded. For details, refer to "Load from external memory" on
page 6-10.
6-6
Image Panel
bizhub 501/421/361 (Version 2)