Table of Contents FEATURES AND FUNCTIONS ..................1 General Introduction..............................1 Features ..................................1 1.2.1 On-Screen Menu..............................1 1.2.2 Proportional Pan and Tilt ............................1 1.2.3 On-screen Tips...............................1 1.2.4 Preset Setup and Call ............................1 1.2.5 Auto Scan................................1 1.2.6 Auto Touring ................................1 1.2.7 Auto Pattern................................1 1.2.8 3D Privacy Masking...............................1 1.2.9 Defog ..................................2...
Page 3
Login and Logout ................................6 MENU ..........................9 Screen Menu Index ..............................9 Self-diagnosis System Information ........................10 Main Menu .................................10 Menu Operation ..............................10 4.4.1 System Information..............................11 4.4.2 Display Setting ..............................12 4.4.3 Camera Setting ..............................12 4.4.4 Function Setting ..............................18 4.4.5 IR Light Setting..............................26 Dome Abnormal Phenomenon Operation ......................26 4.5.1 Restore to Factory Default Setup ........................26 4.5.2...
Page 4
Welcome Thank you for purchasing our product! This user’s manual is designed to be a reference tool for the operation of your system. Here you can find information about this speed dome features and functions, as well as a detailed menu tree. Please keep it well for future reference! Before installation and operation, please read the following safeguards and warnings carefully!
Important Safeguards and Warnings 1.Electrical safety All installation and operation here should conform to your local electrical safety codes. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation. We are not liable for any problems caused by unauthorized modification or attempted repair. 2.Transportation Security No heavy stress, violent vibration or water splash are allowed during transportation, storage and installation.
Page 6
6. About Accessories Always use all the accessories recommended by manufacturer. Before installation, please open the package and check that all the components are included in the package: Contact you local retailer ASAP if something is missing in your package.
1 Features and Functions 1.1 General Introduction This series IR network intelligent speed dome product is an integrated high intelligent speed dome. It adopts new configuration design and is easy for the project construction. This is a digital and intelligent product of vivid video.
1.2.9 Defog Customized defog setup in case the fog environment may affect the video quality. It is to enhance video resolution. 1.2.10 3D noise reduction Support 3D noise reduction setup to reduce the camera noise under the low illumination environment. It is to enhance video quality.
2 Quick Configuration Tool 2.1 Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. 2.2 Operation Double click the “ConfigTools.exe”icon, you can see an interface is shown as in Figure 2-1.
Page 10
Figure 2-2 Select the “Open Device Web” item; you can go to the corresponding web login interface. See Figure 2-3. Figure 2-3 If you want to modify the device IP address without logging in the device web interface, you can go to the configuration tool main interface to set.
Page 11
Figure 2-4 After you logged in, the configuration tool main interface is shown as below. See Figure 2-5. Figure 2-5 For detailed information and operation instruction of the quick configuration tool, please refer to the Quick Configuration Tool User’s Manual included in the resources CD.
3 Web Operation This series speed dome product supports the Web access and management via PC. Web includes several modules: live view, PTZ, setup, alarm, logout and etc. Speed dome factory default setup: IP address: 192.168.1.108. User name: admin Password: admin 3.1 Network Connection Please follow the steps listed below for network connection.
Page 13
Figure 3-2 After installation, the interface is shown as below. See Figure 3-3. Please input your user name and password. Default factory name is admin and password is admin. Select the network connection type. Note: For security reasons, please modify your password after you first login. Figure 3-3 After you logged in, you can see the main window.
Page 14
Figure 3-4 Please refer to the Web Operation Manual included in the resource CD for detailed operation instruction.
4 Menu 4.1 Screen Menu Index Note: ERR means current setup is invalid; you need to restores speed dome factory default setup. Slight difference may be found due to different series. SYSTEM SETTING SYSTEM INFORMATION… ADDR INFORMATION… SET NORTH LANGUAGE FACTORY DEFAULT RESTART BACK...
Note: ERR means current setup is invalid. Please make sure all the cable connections are right. 4.2 Self-diagnosis System Information ADDR :001-S BAUD RATE :9600 PARITY :NONE SOFTWARE :V1.02.0.R BACK EXIT After installation, please connect speed dome to power. The system goes on a self-diagnosis, and then it pops up the above interface to show the system information.
In the speed dome main menu, you can use the left/right button on the keyboard or in the speed dome terminal menu to configure the system menu. Before setup, please move the cursor to the current item you want to configure. In main menu, please click confirm button to go to the sub menu or use left/right key to configure setup.
Move the cursor to SITE INFORMATION and then click confirm button. ADDR TYPE: System supports software address only. ADDR-SOFT: It is to display speed dome software address. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. The value ranges from 1 to 255. BACK: Go back to the previous menu.
Page 19
Move the cursor to CAMERA SETTING and then click confirm button, you can go to the submenu. WHITE BALANCE SETUP: Move the cursor to current option and then click confirm button, you can go to the third menu. EXPOSURE SETTING: Move the cursor to current option and then click confirm button, you can go to the third menu.
Page 20
4.4.3.2 Exposure Setting AE MODE : AUTO AGC GAIN LIMIT :03 GAIN SETTING : 02 HIGH GAIN :ON SHUTTER SLOW SHUTTER LIMIT :1/50 :1/25 IRIS SETTING NOISE REDUCTION :11 :03 EXPOSURE COMP : 08 3D NOISE REDUCTION SLOW AE : 01 :OFF SLOW SHUTTER HIGH LIGHT REDUCE...
Page 21
HIGH LIGHT REDUCE: It is to reduce the abruptly strong video on the video in case it affects the video quality. Please click the left/right button to set. EXPOSURE RESTRAIN: It is to restrain the abrupt high light on the video in case it affects the video quality.
Page 22
: It is to set video shadow correction level. Please use the left/right button on the SHADOW CORRECTION keyboard or in the speed dome terminal menu to set. BACK: Go back to previous menu. EXIT: Log out system menu. 4.4.3.5 Day/Night Setting Move the cursor to DAY/NIGHT SETTING and then click confirm button, you can go to the submenu.
Page 23
BACK: Go back to previous menu. EXIT: Log out system menu. 4.4.3.7 Image Adjust Move the cursor to IMAGE ADJUST and then click confirm button to go to the submenu to set. : SATURATION : CHROMA SUPPRESS : GAMMA : CONTRAST BACK EXIT...
DIGITAL ZOOM ::OFF :X3 DZOOM LIMIT PICTURE FLIP :OFF FREEZE FUNC :OFF :OFF STABLE CAMERA FACTORY DEFAULT CAMERA RESTATRT BACK EXIT DIGITAL ZOOM: You can use the left/right button to enable/disable the digital zoom function. DZOOM LIMIT: Here you can set the threshold of the digital zoom. PICTURE FLIP: There are two options: on/off.
Page 25
BACK: Go back to previous menu. EXIT: Log out system menu. 4.4.4.1 Preset Setup PRESET NO :001 TITLE :PRESET001 SETTING CALL BACK EXIT Move the cursor to PRESET button and then click confirm button to go to set interface. PRESET NO: Please use left/right key to modify preset number. The different protocols support different preset values.
Page 26
EXIT: Log out system menu. 4.4.4.3 Scan AUTO SCAN NO : 001 SET LEFT LIMIT SET RIGHT LIMIT SCAN SPEED :160 CALL STOP BACK EXIT Move the cursor to SCAN button and then click confirm button. AUTO SCAN NO:Here is to set auto scan number. Please use the left/right button on the keyboard or in the speed dome terminal menu to set.
Page 27
When you move the cursor to one tour number, please click confirm button to set the tour. Please use up/down button to set preset number, dwell time and speed. Use the left/right button to go to the next tour. Click confirm button you can exit the setup. After you completed the setup, move the cursor to back button to go to the previous interface.
Page 28
IDLE FUNC :OFF IDLE TIME :010MIN IDLE ACTION :PRESET PARAMETER :NONE SAVE BACK EXIT When there is no available command for specified time, dome automatically goes on the previous set functions. • IDLE FUNCTION :There are two modes ON/OFF. Please use left/right key to set. •...
Page 29
• WEEK: Here you can set the week information. Please use the left/right button to set. You can set for one day, or you can set for the whole week. • START TIME: Here you can set the task begin time. Move the cursor to current item and then click confirm button to set the time.
Page 30
• PRIVACY MASK: Here you can set the privacy mask number and etc. It includes the third menu. Please move the cursor to the current item and then click the confirm button to go to the next interface. • PTZ SPEED: It is to set PTZ speed. Please use the left/right button to set. •...
Page 31
RESIZE:It is to adjust the privacy zone size. Move the cursor to current item and use the left/right button on the keyboard or in the speed dome terminal menu to set .Please continue pressing direction button to widen or narrow zone size. ← is to narrow the horizontal width and → is to widen the horizontal width.
HEATER CONTROL: It is to set temperature control mode. It includes three modes: auto/normal open/normal close. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. OPEN TEMPERATUREP: This function is on when the heater control mode is auto. It is for you to set temperature to enable the heater.
5 Cable Connection 5.1 Combination Cable Connection The speed dome combination cable includes network cable, audio/video cable connection port, RS485 connection port, alarm input and output port. Please refer to the label for detailed information. Please note the IE6 does not support alarm upload function. Please use IE7 or higher version. If it is your first time to boot up the WEB on the Windows 7 OS, please right click the Internet Explorer icon on the desktop and then select “Run as Administrator”.
5.2.1 System Connection Please refer to Figure 5-1 for system connection information. Network AC220V Power Output Input Output Transfor Figure 5-1 5.2.2 Alarm Connection Please refer to Figure 5-2 for alarm connection information. Figure 5-2...
6 FAQ 6.1 Daily Maintenance Please clean dome cover regularly to get vivid image. Handle the cover with care. Use water to wash. Don’t use cloth to clean. Note: The sweat from your hand may erode plating surface, your nail may scrape dome cover resulting in blur image.
7 Appendix Ⅰ Thunder Proof and Surge Protection This series speed dome adopts TVS lighting protection technology. It can effectively prevent damages from various pulse signals below 1500W, such as sudden lighting and surge. While maintaining your local electrical safety code, you still need to take necessary precaution measures when installing the speed dome in the outdoor environment.
8 Appendix 2 Toxic or Hazardous Materials or Elements Toxic or Hazardous Materials or Elements Component Name Cr VI PBDE Sheet Metal ○ ○ ○ ○ ○ ○ Plastic Parts ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○...
Page 38
Note • This manual is for reference only. Slight difference may be found in the user interface. • All the designs and software here are subject to change without prior written notice. • All trademarks and registered trademarks are the properties of their respective owners. •...
Need help?
Do you have a question about the IPPTZ-EL2MPIR250L30X-AT and is the answer not in the manual?
Questions and answers