1. Manuals
  2. Brands
  3. Security Camera King Manuals
  4. Security Camera
  5. IPPTZ-EL2MPL12X-Mini-F
  6. Operation manual

Security Camera King IPPTZ-EL2MPL12X-Mini-F Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

IPPTZ-EL2MPL12X-Mini-F Operation Manual
Version 1.0.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IPPTZ-EL2MPL12X-Mini-F and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Security Camera King IPPTZ-EL2MPL12X-Mini-F

Summary of Contents for Security Camera King IPPTZ-EL2MPL12X-Mini-F

  • Page 1 IPPTZ-EL2MPL12X-Mini-F Operation Manual Version 1.0.0...

  • Page 2: Table Of Contents

    Table of Contents Network Connection ........................1 Preparation ........................1 Log in ..........................1 Live Interface ......................... 3 Encode Setup ........................ 3 Video Window Setup ....................4 System Menu ......................... 5 Video Window Function Option .................. 6 PTZ Control ........................7 PTZ Setup/Menu ......................
  • Page 3 3.1.2 Video ........................24 3.1.3 Audio ........................29 Network ......................... 30 3.2.1 TCP/IP ........................30 3.2.2 Connection ......................32 3.2.3 PPPoE ........................34 3.2.4 DDNS ........................34 3.2.5 IP filter ........................35 3.2.6 SMTP （e-mail） ....................36 3.2.7 UPnP ........................37 3.2.8 SNMP ........................
  • Page 4 3.7.5 Auto maintenance ....................73 3.7.6 Firmware update ....................74 Information ........................74 3.8.1 Version ........................74 3.8.2 Log .......................... 74 3.8.3 Online User ......................76 Alarm ............................77 Log out ............................78 Important  The following functions are for reference only. Some series products may not support all the functions listed below.

  • Page 5: Network Connection

    1 Network Connection 1.1 Preparation This series speed dome product supports the Web access and management via PC. Web includes several modules: monitor channel preview, PTZ control, system configuration, alarm and etc. Please follow the steps listed below for network connection. ...
  • Page 6 Figure 1-2 If it is your first time to login in, system pops up warning information to ask you whether install control webrec.cab or not. Please click OK button, system can automatically install the control. When system is upgrading, it can overwrite the previous Web too. If you can’t download the ActiveX file, please check whether you have installed the plug-in to disable the control download.

  • Page 7: Live Interface

    1.3 Live Interface After you logged in, you can see the live monitor window. Now you can operate the speed dome via the WEB. See Figure 1-4. Figure 1-4 There are six sections:  Section 1: Encode setup bar  Section 2: Window adjust bar ...

  • Page 8: Video Window Setup

    Parameter Function In normal network width environment, main stream can record Main stream video file and realize network monitor. If network width is not sufficient, you can use sub stream to Sub (Extra) realize network monitor. It is to reduce network bandwidth stream usage.

  • Page 9: System Menu

    Figure 1-7 Please refer to the following sheet for detailed information. Parameter Function Video Brightness setup icon. It is to adjust Note: setup monitor video brightness.  All the operations here apply to WEB end Contrast setup icon. It is to adjust only.

  • Page 10: Video Window Function Option

    Please refer to chapter 1.3 Live, chapter 2 Playback，Chapter 3 Setup, chapter 4 Alarm, chapter 5 Log out for detailed information. Figure 1-8 1.7 Video Window Function Option The interface is shown as below. See Figure 1-9. Figure 1-9 Please refer to the following sheet for detailed information. Parameter Function Click it and then select pen color, you can write down the...

  • Page 11: Ptz Control

    Bidirectional Click it to begin audio talk. You can go to Setup->Camera- talk >Audio to set bidirectional talk mode. Help Click it to open help file. 1.8 PTZ Control Before PTZ operation, please make sure you have properly set PTZ protocol. (Please go to Setup- >System->PTZ to set.).
  • Page 12 Figure 1-11 Click PTZ set button, the interface is shown as in Figure 1-12.Here you can select scan, preset, tour pattern, assistant function and etc. Figure 1-12 Please refer to the following sheet for PTZ setup information. Parameter Function  Select Scan from the dropdown list, click Start button, you can Scan begin scan operation.
  • Page 13 Parameter Function  Select Tour from the dropdown list and then click Start button, Tour you can begin tour.  You can select Pattern from the dropdown list and then click Pattern Start button to begin PTZ movement.  Reserved assistant function. Assistant ...

  • Page 14: Playback

    2 Playback 2.1 Playback Interface The playback interface is shown as in Figure 2-1. Figure 2-1 You can refer to the following sheet for detailed information. Name Playback control button Date File list Time process format 2.2 Playback Control Button Playback control button is shown as below.

  • Page 15: Date

    Figure 2-2 You can refer to the following sheet for detailed information. Name Function Play To start or resume playback. Stop Stop current playback. Frame by frame Play next frame. Please pause playback first if you want to use frame by frame playback function. Slow play Slow playback.
  • Page 16 Figure 2-3 You can refer to the following sheet for detailed information. Icon Name Function Search It is to search record from the start time of you selected date to the previous 24 hours. Stop Click it to download selected file(s) to local Back Click it to go back to calendar interface to select date again.

  • Page 17: Process Bar Format

    2.5 Process bar format You can refer to the following sheet for detailed information. Icon Function Process bar is in 24H mode. It is to display the record files of previous two hours. It is to display the record files of previous one hour.

  • Page 18: Setup

    3 Setup 3.1 Camera 3.1.1 Conditions Here you can set camera property. Adjust video parameter to get best preview effect. See Figure 3-1. Figure 3-1 Please refer to the following sheet for detailed information. Parameter Function Here you can set camera setup mode. It includes: Config File normal/day/night.
  • Page 19 It is to set digital zoom/camera zoom rate. You need to check Zoom the box here to enable digital zoom function. It is to set camera lens sharpness, and sharpness control level. Sharpness It is to set camera video. It includes: Picture style/hue/brightness/saturation/ chroma control/gamma/picture flip/picture freeze.
  • Page 20 Figure 3-3 Please refer to the following sheet for detailed information. Parameter Function  It is to set camera exposure mode. It includes: Exposure mode auto/manual/aperture has the priority/shutter has the priority. The default setup is auto.  For the auto exposure mode, the gain, shutter and iris are in auto mode.
  • Page 21 In lower illumination environment, you can lower the cameras Slow shutter auto exposure time to capture the image and enhance the definition. For the moving object , the trail may appear. Please note it is valid in auto mode. It is to set camera min shutter value. Auto Slow Shutter Min value...
  • Page 22 Parameter Function It is to control noise. The higher the level is; the small the noise 2D NR is. Comparing with the previous one, the picture may become a little bit blurry. It is to control noise. The higher the level is; the small the noise 3D NR is.
  • Page 23 Figure 3-6 Please refer to the following sheet for detailed information. Parameter Function It is to set camera focus mode. It includes: auto/manual/semi Focus mode auto. It is to camera focus distance in case the focus distance is too Focus limit small and the focus goes to the enclosure.
  • Page 24 Figure 3-7 Please refer to the following sheet for detailed information. Parameter Function It is to set camera zoom speed. The bigger the value is, the Zoom speed faster the speed is. Check the box here to enable digital zoom function. Digital zoom 3.1.1.7 Sharpness Sharpness interface is shown as in Figure 3-8.
  • Page 25 Figure 3-8 Please refer to the following sheet for detailed information. Parameter Function It is to set camera sharpness. The higher the sharpness is, the Sharpness clear the image is. The object edge becomes clear too. It is to set camera control level. The higher the value is, the Sharpness strong the control level is.
  • Page 26 Figure 3-9 Please refer to the following sheet for detailed information. Parameter Function It is to set video style. It includes：Standard/soft/ flamboyant. Style It is to set picture hue. It is to set color purity. The higher the purity is, the more color Saturation the video is.
  • Page 27 Figure 3-10 Please refer to the following sheet for detailed information. Parameter Function It is to restore camera parameter to factory default setup. Default 3.1.1.10 Profile Management Profile management interface is shown as in Figure 3-11. Figure 3-11 Please refer to the following sheet for detailed information.

  • Page 28: Video

    Parameter Function There are three modes: normal/full-time/schedule. The default Profile setup is normal. Management It is to adopt the general parameter on the profile file. Normal It is to adopt day or night general parameter on the profile file Full-time all the time.
  • Page 29 Parameter Function There are four options: H.264, H.264H, and MJPEG Encode mode encode mode.  H.264 : Main Profile encode mode.  H.264H: High Profile encode mode.  MJPEG: In this encode mode, the video needs general large bit stream to guarantee the video definition.
  • Page 30 Parameter Function Please check the box here to enable extra stream Enable function. stream This function is enabled by default. General bit stream. Bit stream type There are four options: H.264, H.264B, H.264H, and Encode mode MJPEG encode mode.  H.264 : Main Profile encode mode.
  • Page 31 Parameter Function I Frame Here you can set the P frame amount between two I frames. The value ranges from 1 to 150. Default value is 50. Recommended value is frame rate *2. Important I frame interval setup is null if it is the MJPEG encode mode.
  • Page 32 Figure 3-14 Please refer to the following sheet for detailed information. Parameter Function Privacy mask  Here you can privacy mask the specified video in the monitor video.  Click Setup button, you can set privacy mask region. System max supports 4 privacy mask zones. Time Title ...

  • Page 33: Audio

    Refresh After you successfully set privacy mask zone, channel title, time title, you can click Refresh button to video the effect. 3.1.2.4 Path The storage path interface is shown as in Figure 3-15. Here you can set snap image saved path ( in the preview interface) and the record storage path in the preview interface).The snap picture default setup is C:\PictureDownload and record file default setup is C:\RecordDownload.

  • Page 34: Network

    Parameter Function  Audio enable Main stream: Recorded file only contains video by default. You need to check the audio box here to enable audio function so that the main stream the network transmitted is audio/video composite stream.  Sub (Extra) stream: Recorded file only contains video by default.
  • Page 35 Ethernet Card Please select the Ethernet port if the device has several network cards. Mode There are two modes: static mode and the DHCP mode.  The IP/subnet mask/gateway are null when you select the DHCP mode to auto search the IP. ...

  • Page 36: Connection

    Enable You can use ARP/Ping command to modify or set the device IP ARP/Ping set address if you know the device MAC address. device IP Before the operation, please make sure the speed dome and address service. the PC in the same LAN. This function is on by default. You can refer to the steps listed below.
  • Page 37 Please refer to the following sheet for detailed information. Parameter Function It is the max Web connection for the same device. The value ranges from 1 connection to 20. The default setup is 10. TCP port The value ranges from 1025 to 65535. The default value is 37777. You can input the actual port number if necessary.

  • Page 38: Pppoe

    3.2.3 PPPoE The PPPoE interface is shown as in Figure 3-19. Input the PPPoE user name and password you get from the IPS (internet service provider) and enable PPPoE function. Please save current setup and then reboot the device to get the setup activated. Device connects to the internet via PPPoE after reboot.

  • Page 39: Ip Filter

    Figure 3-20 Please refer to the following sheet for detailed information. Parameter Function Server Type You can select DDNS protocol from the dropdown list and then enable DDNS function. Server IP DDNS server IP address Domain Name Your self-defined domain name. User The user name you input to log in the server.

  • Page 40: Smtp （E-Mail

    Figure 3-21 3.2.6 SMTP （e-mail） The SMTP interface is shown as in Figure 3-22. Figure 3-22 Please refer to the following sheet for detailed information.

  • Page 41: Upnp

    Parameter Function Input server address and then enable this function. SMTP Server Port Default value is 25. You can modify it if necessary. Anonymity For the server supports the anonymity function. You can auto login anonymously. You do not need to input the user name, password and the sender information.
  • Page 42  Manual mode: Select an item in the list, you can modify and delete. Click Add mapping button, you can add a new one. See Figure 3-23.  Auto mode: The mapping is fixed and can not be added/deleted/modified. See Figure 3-24. In the Windows OS, From Start->Control Panel->Add or remove programs.

  • Page 43: Snmp

    Figure 3-24 3.2.8 SNMP The SNMP interface is shown as in Figure 3-25. The SNMP allows the communication between the network management work station software and the proxy of the managed device. Please install the software such as MG MibBrowser 8.0c software or establish the SNMP service before you use this function.

  • Page 44: Bonjour

    Please refer to the following sheet for detailed information. Parameter Function SNMP Port The listening port of the proxy program of the device. It is a UDP port not a TCP port. The value ranges from 1 to 65535. The default value is 161 It is a string.

  • Page 45: Multicast

    You can view the server name when the speed dome is detected by the Bonjour. Please note the safari browse support this function. Click the “Display All Bookmarks: and open the Bonjour, system can auto detect the speed dome of the Bonjour function in the LAN. Figure 3-26 3.2.10 Multicast The multicast interface is shown as in Figure 3-27.

  • Page 46: Ieee802

    Figure 3-27 3.2.11 IEEE802 IEEE802.1X works standing for local and metropolitan area networks and port based network access control protocol. It supports manual operation of the client to choose means of authenticating by which to control it to access to the Local Area Networks or not. It supports the ability to authenticate, to calculate fee, to ensure security and to maintain requirements.

  • Page 47: Qos

    Please refer to the following sheet for detailed information. Parameter Function Authentication PEAP (protected EAP protocol). Username It needs the username to login, which is authenticated by the server. Password Please input password here. 3.2.12 Qos The QoS interface is shown as below. See Figure 3-29. Qos (Quality of Service) is network security mechanism.

  • Page 48: Ptz

    Parameter Function Real-time The data packet of the network video monitor. monitor Command The non-monitor packet such as device setup and search. 3.3 PTZ 3.3.1 Protocol 3.3.1.1 Network PTZ Setup Network PTZ setup interface is shown as in Figure 3-30. Figure 3-30 Please refer to the following sheet for detailed information.

  • Page 49: Function

    Please refer to the following sheet for detailed information. Parameter Function Address It is to set the corresponding speed dome address. The default setup is 0. Baud rate It is to set the baud rate of the camera. The default setup is 38400.
  • Page 50 Figure 3-32 Please refer to the following sheet for detailed information. Parameter Function Preset No. Set preset No. It becomes valid after you set. Preset title Set preset name. You can input self-defined preset name here. Delete Delete corresponding preset. Save Save current preset setup.
  • Page 51 Figure 3-33 Please refer to the following sheet for detailed information. Parameter Function Tour No. System auto allocates. Tour title Set tour name. You can input self-defined tour name here. Begin tour. Start Please note this function is null if you have not set a tour. Click it to add a new tour.
  • Page 52 Figure 3-34 Please refer to the following sheet for detailed information. Parameter Function Scan No. System auto allocates. Set scan speed here. Speed You can not set speed when camera is running scan. Begin scan. Start Please note this function is null if you have not set a scan. Click set button, you can set left limit and right limit.
  • Page 53 Figure 3-35 Please refer to the following sheet for detailed information. Parameter Function Pattern No. System auto allocates. Begin pattern. Start Please note this function is null if you have not set a pattern. Click it you can see start/stop record buttons. Start record Click it to begin recording pattern setup.
  • Page 54 Figure 3-36 Please refer to the following sheet for detailed information. Parameter Function Rotation It is to set camera rotation speed. speed Start Check it to start rotation movement. 3.3.2.6 Privacy Mask Privacy mask interface is shown as below. See Figure 3-37. Figure 3-37...
  • Page 55 Please refer to the following sheet for detailed information. Parameter Function Privacy Here you can set camera PTZ speed. mask zone Enable Check the box here to enable privacy mask function. Draw Click it to draw a privacy mask zone on the preview window. Click it to clear all privacy mask zone(s) on the preview Clear window.
  • Page 56 Figure 3-39 Please refer to the following sheet for detailed information. Parameter Function Enable Check the box here to enable idle motion function. Here you can set preset, scan, pattern, tour. Idle Motion Please note you need to set the corresponding operation first if you want to use this function.
  • Page 57 Figure 3-40 Please refer to the following sheet for detailed information. Parameter Function Enable Check the box here to enable power up function. Here you can set preset, scan, pattern, tour and auto. Power up Please note you need to set the corresponding function first if you want to use it.
  • Page 58 Figure 3-41 Please refer to the following sheet for detailed information. Parameter Function PTZ restart It is to reboot PTZ. 3.3.2.11 Default Default interface is shown as below. See Figure 3-42. Figure 3-42...

  • Page 59: Light

    Please refer to the following sheet for detailed information. Parameter Function Default Restore PTZ factory default setup. 3.4 Light 3.4.1 IR Light Important Please make sure your purchased camera supports all the functions listed here. The IR light has two interface: zoom has the priority(Figure 3-43)/manual has the priority(Figure 3-44). Figure 3-43...

  • Page 60: Event

    Figure 3-44 Please refer to the following sheet for detailed information. Parameter Function Zoom has the Enable IR light when the zoom has the priority. The IR light near priority light value/far light value can automatically adjust according to the zoom speed.
  • Page 61 Figure 3-45 Figure 3-46 Figure 3-47...
  • Page 62 Please refer to the following sheet for detailed information. Parameter Function Enable You need to check the box to enable motion detection function. Region  There are six levels. The sixth level has the highest sensitivity.  Region: If you select motion detection type, you can click this button to set motion detection zone.
  • Page 63 Parameter Function Snapshot It is snapshot activation function. 3.5.1.2 Video Masking The video masking interface is shown as in Figure 3-48. Figure 3-48 Please refer to the following sheet for detailed information. Parameter Function Enable You need to check the box to enable video masking function. Working Video masking function becomes activated in the specified ...

  • Page 64: Alarm

    Parameter Function System can delay the record for specified time after video Record Delay masking alarm ended. The value ranges from 10s to 300s. Enable alarm activation function. You need to select alarm output Relay out port so that system can activate corresponding alarm device when alarm occurs.

  • Page 65: Abnormality

    Parameter Function Working This function becomes activated in the specified periods.  Period  There are six periods in one day. Please draw a circle to enable corresponding period. Select date. If you do not select, current setup applies to today ...
  • Page 66 Figure 3-50 Figure 3-51 Figure 3-52...
  • Page 67 Figure 3-53 Figure 3-54 Please refer to the following sheet for detailed information. Parameter Function Event  The abnormal events include: no SD card, no space, SD card error, Type disconnection, IP conflict.  You need to draw a circle to enable this function. Record System auto activates channel to record once an alarm occurs (For disconnection type only.

  • Page 68: Storage

    Parameter Function Send If you enable this function, system can send out email to alarm the email specified user. 3.6 Storage 3.6.1 Record schedule and snapshot schedule/Holiday In these two interfaces, you can add or remove the schedule record/snapshot setup. See Figure 3-55. There are three record modes: general (auto), motion detect and alarm.
  • Page 69 Figure 3-56 Please refer to the following sheet for detailed information. Parameter Function Event It includes: general, motion detect and alarm. Type Local It is to save in the SD card. It is to save in the FTP server. The local interface is shown as in Figure 3-57. Here you can view local SD card information. You can also operate the read-only, write-only, hot swap and format operation.

  • Page 70: Record Control

    Figure 3-58 3.6.3 Record control The record control interface is shown as in Figure 3-59. Figure 3-59 Please refer to the following sheet for detailed information. Parameter Function Here you can select file size. Default setup is 60 minutes. Pack Duration Pre-record Please input pre-record value here.

  • Page 71: System

    There are two options: stop recording or overwrite the previous files Disk Full when HDD is full.  Stop: Current working HDD is overwriting or current HDD is full, it will stop record.  Overwrite: Current working HDD is full; it will overwrite the previous file.
  • Page 72 3.7.1.2 Date and time The date and time interface is shown as in Figure 3-61 Figure 3-61 Please refer to the following sheet for detailed information. Parameter Function Here you can select date format from the dropdown list. Date format There are two options: 24-H and 12-H.

  • Page 73: Account

    3.7.2 Account Note:  For the character in the following user name or the user group name, system max supports 15- digits. The space in the front or at the end of the string is null. The valid string includes: character, number, and underline.
  • Page 74 Figure 3-63 Modify user It is to modify the user property, belonging group, password and rights. See Figure 3-64. Modify password It is to modify the user password. You need to input the old password and then input the new password twice to confirm the new setup.
  • Page 75 Figure 3-65 Add group: It is to add group and set its corresponding rights. See Figure 3-66. Please input the group name and then check the box to select the corresponding rights. It includes: live playback, record control, backup, PTZ control, user management and etc. Figure 3-66 Modify group Click the modify group button, you can see an interface is shown as in Figure 3-67.

  • Page 76: Default

    Figure 3-67 3.7.3 Default The default setup interface is shown as in Figure 3-68. Please note system can not restore some information such as network IP address. Figure 3-68 3.7.4 Import/Export The interface is shown as in Figure 3-69.

  • Page 77: Auto Maintenance

    Figure 3-69 Please refer to the following sheet for detailed information. Parameter Function It is to import the local setup files to the system. Import It is to export the corresponding system setup to your local PC. Export 3.7.5 Auto maintenance The auto maintenance interface is shown as in Figure 3-70.

  • Page 78: Firmware Update

    3.7.6 Firmware update The firmware interface is shown as in Figure 3-71. Please select the upgrade file and then click the update button to begin firmware update. Important Do not turn off the device power, disconnect the device, reboot or shutdown the device during the update period.
  • Page 79 Figure 3-73 Please refer to the following sheet for log parameter information. Parameter Function Log types include: system operation, configuration operation, data Type operation, event operation, record operation, and user management, log clear. Set the start time of the requested log. Start time Set the end time of the requested log.

  • Page 80: Online User

    Figure 3-74 Please refer to the following sheet for log parameter information. Parameter Function Check the box here to enable remote log function. Enable Input server IP address. IP address Input server port. The value ranges from 1～65534. Port 3.8.3 Online User The online user interface is shown as in Figure 3-75.

  • Page 81: Alarm

    4 Alarm Click alarm function, you can see an interface is shown as in Figure 4-1. Here you can set device alarm type and alarm sound setup. When the specified alarm occurred (you have subscribed), system can record the corresponding alarm information on the right pane of the alarm list.

  • Page 82: Log Out

    5 Log out Click log out button, system goes back to log in interface. See Figure 5-1. You need to input user name and password to login again. Figure 5-1 Note:  This manual is for reference only. Slight difference may be found in user interface. ...

Table of Contents