Table of Contents
Advertisement
5. • W • € ƒ ‚ ƒ j ƒ ^ ƒ ‚ • [ ƒ h
4. About available modes
The LCD remote keypad offers the following three modes, just as with the inverter's
main operation panel.
(1) Top View Mode
When the remote keypad is turned on, it enters this mode first.
The top window displays the operating status.
In this mode, you can set a panel operation frequency, use a function key as the
EASY key, and soon.
⇒ Refer to 5. Operation in Top View Mode.
(2) Parameter Setup Mode
This mode allows you to set parameters.
⇒ Refer to 6. Parameter Setup Mode.
(3) Status Monitor Mode
This mode allows you to monitor various kinds of statuses and information, such
as the operating status of the inverter and information on the terminal board.
⇒ Refer to 7. Operation in Status Monitor Mode.
The figures below show the top windows of these modes.
To change from one mode to another, press the [ESC] key.
ESC
Status Monitor Mode
Real-time information
Rotative direction
Frequency reference
Output current
Input voltage
Output voltage
Top
Status Monitor Mode
Top View Mode
Fwd 60.0 Hz
0.0
Lng
Quick
Top View Mode
Fwd
60.0Hz
0%
99%
0%
Prm
ESC
4-1
STOP
Hz
ESC
---
Parameter Setup Mode
Category Selection
History function
Basic Parameters
Extended Parameters
Changed Parameters
Top
Parameter Setup Mode
* When Quick mode is selected
with the EASY key, other
windows are displayed.
*
Mon
Advertisement
Table of Contents
