Toshiba RAV-SM564UTP-E Service Manual page 92

No. Part name
1. Detachment
Control
5
P .C. board
1) Carry out work of item 1 of
2) Remove connectors which are connected
NOTE :
Unlock the lock of the housing part and then
remove the connector.
3) Unlock the locks of the card edge spacer
2. Attachment
1) Fix the control P .C. board to the card edge
2) Connect the connector removed in item 1
3) Following to work of item 2 of
Procedure
from the control P .C. board to the other
parts and then remove wiring from the
clamp.
CN510 : Louver motor (20P , White)
CN34 : Float switch (3P , Red)
CN504 : Drain pump (2P , White)
CN101 : TC sensor (2P , Black)
CN102 : TCJ sensor (2P , Red)
CN104 : Room temp. Sensor (2P , Orange)
CN333 : Fan motor power supply
(5P , White)
CN334 : Fan motor position detection
(3P , White)
(6 positions) and then remove the control
P.C. board.
spacer (6 positions)
as before and then fix the wiring with the
clamp.
the electric parts box cover and the
suction grille as before.
2 .
Card edge spacer Card edge spacer Card edge spacer
2 , mount
– 92 –
FILE NO. SVM-13010
Remarks
Clamp