Plasmacluster Operation; Gentle Cool Air - Sharp AH-AP18KSY Operation Manual

PLASMACLUSTER OPERATION

The Plasmacluster Ion generator inside the air
conditioner will release positive and negative
plasmacluster ions into the room.
Approximately the same numbers of positive and
negative ions released into the air will reduce
some airborne mold.
1
During operation, press the
PLASMACLUSTER button.
• The remote control will display "
• The blue PLASMACLUSTER lamp on the
unit will light up.
TO CANCEL
Press the PLASMACLUSTER button again.
• The PLASMACLUSTER lamp on the unit will turn
off.
NOTE:
• Use of the PLASMACLUSTER operation will be
memorized, and it will be activated the next time
you turn on the air conditioner.
• To turn off the PLASMACLUSTER lamp, press the
DISPLAY button.
• To perform Plasmacluster operation in FAN only
mode, press the PLASMACLUSTER button when
the unit is not operating. The mode symbol of the
remote control will go off and the fan speed can
not be set AUTO.

GENTLE COOL AIR

Press the GENTLE COOL AIR button during
cooling or dry operation when you do not want
to feel direct cold air. The vertical adjustment
louvre is set obliquely upward to deliver cool air
to the ceiling.
1
During operation, press the GENTLE
COOL AIR button.
• The remote control will display "
".
1
TO CANCEL
Press the GENTLE COOL AIR button again.
NOTE:
• The GENTLE COOL AIR setting is cancelled when
you press POWERFUL JET button while GENTLE
COOL AIR is set.
• If you want GENTLE COOL AIR operation in
POWERFUL JET mode, press GENTLE COOL
AIR button during POWERFUL JET operation.
E-7
".
1