The convection fan motor has approximate
resistance values between the following wires:
Red to blue - 169.1 Ω
Red to grey - 76.3 Ω
Grey to blue - 93.2 Ω
To remove the convection fan and motor
assembly:
1. Remove oven racks. (See
Note: On double oven models, the racks and rack
supports will need to be removed to access the
fan assembly on the small oven. (See
.)
Assemblies
2. Remove the four 1/4-in. hex-head screws that
hold the convection cover to the back wall of the
oven cavity.
.)
Oven Racks
Oven Light
– 59 –
3. Remove the outer six 1/4-in. hex-head screws
that attach the fan assembly to the back wall of
the oven cavity.
Caution: To avoid scratching the oven fl oor, cover
the fl oor with protective surface.
4. Carefully pull the fan assembly into the oven
cavity and disconnect the fan motor wire
harness.
Disconnect
(Continued next page)