UNPACKING YOUR MITER SAW
WARNING
!
To avoid injury from unexpected
starting or electrical shock, do not
plug the power cord into a source
of power during unpacking and
assembly. This cord must remain
unplugged whenever you are
working on the saw.
1. Remove the miter saw from the
carton. IMPORTANT: Do not lift
miter saw by the trigger switch
handle. It may cause misalignment.
2. Place the saw on a secure
stationary work surface.
3. Separate all parts from the packing
material. Check each one with
CARTON CONTENTS
MiterMate™
Miter Saw
Clamp
the illustration to make certain all
items are accounted for, before
discarding any packing material.
WARNING
!
● If any part is missing or damaged,
do not attempt to assemble the
miter saw, or plug in the power
cord until the missing or damaged
part is correctly replaced. To
avoid electric shock, use only
identical replacement parts when
servicing double insulated tools.
Call 1-800-4-MY-HOME
replacement parts.
Angle Finder
Dust Bag
13
13
Angle Finder Storage Clip
Blade Wrench
for
®