Carton Contents - Craftsman 137.418000 Operator's Manual

UNPACKING YOUR MITER SAW
WARNING
!
To avoid injury from unexpected
starting or electrical shock, do not
plug the power cord into a source
of power during unpacking and
assembly. This cord must remain
unplugged whenever you are
working on the saw.
1. Remove the miter saw from the
carton.
IMPORTANT: Do not lift miter saw
by the trigger switch handle. It may
cause misalignment. Lift machine
by the built-in carry handle.
2. Place the saw on a secure
stationary work surface.
Blade Wrench

CARTON CONTENTS

Miter Saw
Dust Bag
3. Separate all parts from the packing
material. Check each one with the
illustration to make certain all items
are accounted for before discarding
any packing material.
WARNING
!
If any part is missing or damaged,
do not attempt to assemble the
miter saw, or plug in the power cord
until the missing or damaged part is
correctly replaced. Call 1-800-843-
1682 for missing or damaged part
replacement. To avoid electric shock,
use only identical replacement parts
when servicing double insulated
tools. Call 1-888-331-4569 for
replacement parts.
Hold-Down Clamp
14
Operator's Manual
Miter Handle