How To Set Up Type Of Swing - Toshiba RAV-SM564UT-E Service Manual

Toshiba SDI / DI tuotteiden jälleenmyyjä pääkaupunkiseudulla on Jäähdytinpalvelu RefGroup Oy.

3. How to set up type of swing

<For only 4-way Discharge Cassette type>
1
SWING/FIX
Push for 4 seconds or more during stop of
the operation.
• flashes.
2
UNIT LOUVER
Push (At the left side of the button) and
select the unit to be selected.
• Every pushing the button, the unit No. changes.
UNIT No.
1–1
UNIT No.
No display
The fan of the selected unit rotates and the louver swings.
3
Using TIMER SET
the swing.
Swing setup code
0001
0002
0003
REQUIREMENT
• Do not set 0000. (Louver may cause a trouble.)
4
SET
Push .
5
TEST
Push to finish the setup.
∗ Standard swing
Four louvers swing simultaneously with the same
angel.
UNIT No. UNIT No.
1–2 1–3
UNIT No.
1–4
/ buttons, select type of
Swing setup code
Louver operation
Standard swing (At shipment)
Dual swing
Cycle swing
Swing Swing
www.ilmalämpöpumput.com
– 162 –
∗ Dual swing
(Recommended for heating operation)
• The adjoined louvers repeat horizontal
discharge/Downward discharge alternately
to clear irregularity of the temperature in
heating operation.
• The vertical discharge spreads hot air to
the floor, and the horizontal discharge stirs.
Both suppress the temperature irregularity.
Horizontal Horizontal Hor ontal
discharge discharge discharge
Do Downward Downw wnward ard Do Downw Downward
discharge discharge discharge discharge discharge
Hor Horizontal Horizontal ontal
discharge discharge discharge
Downward Downw Do wnward Do Downward Downw
discharge discharge discharge discharge discharge discharge
∗ Cycle swing
(Recommended for cooling operation)
• 4 louvers swing with time lag as if they
heave.
Horizontal Horizontal Hor ontal
discharge discharge discharge
wnward ard
Horizontal Horizontal Hor ontal
discharge discharge discharge
wnward