Error! Use the Home tab to apply
Home tab to apply
4.22
Bluetooth Card
Removing the Bluetooth card
Remove the Bluetooth card according to the following procedures and Figure 4.47.
1. Remove the Bluetooth cable from the Bluetooth card.
2. Press down the latch and push the Bluetooth card in the direction indicated in the figure
4.47 and slide the Bluetooth card out.
3. Remove the card from the logic lower assembly.
NOTE: Be careful not to damage the Bluetooth Card when connecting it with the cable. Make
sure the card is seated in the correct position.
Satellite L500D Maintenance Manual
2 to the text that you want to appear here. Error! Use the
2 to the text that you want to appear here.
Figure 4.47 Removing the Bluetooth card
4 Replacement Procedures
4-63