Error! Style not defined. Error! Style not defined.
4.11
Bluetooth Card
Removing the Bluetooth card
Remove the Bluetooth card according to the following procedures.
1. Pry up the Bluetooth card and remove the cable from the logic upper assembly carefully
because there is a double sided adhesive applied on the cable.
2. Detach the cable from the Bluetooth card.
Installing the Bluetooth Card
Install the Bluetooth card according to the following procedures.
1. Connect the cable to the Bluetooth card.
2. Seat the Bluetooth card in the correct position on the logic upper assembly.
NB300 Maintenance Manual
Figure 4.35 Remove the Bluetooth card
Figure 4.36 Detach the cable from the Bluetooth card
4 Replacement Procedures
4-37