Error! Use the Home tab to apply
Home tab to apply
Installing the LCD Module and Inverter Board
Install the inverter board according to the following procedures.
1. Turn the LCD module cover and place it face down on a protective surface such as a foam
pad.
2. Connect the LVDS cable to the LCD panel connector.
3. Turn the LCD right side up.
4. Seat the LCD hinge assembly in the correct position beside the LCD panel and secure it
with six M2x3 screws according to the sequence indicated in Figure 4.43.
M2x3*6
2
1
3
Satellite L500D Maintenance Manual
2 to the text that you want to appear here. Error! Use the
2 to the text that you want to appear here.
Figure 4.43 Installing the LCD Hinge Assembly
4 Replacement Procedures
2
1
3
4-59