4 Replacement Procedures
4.11 USB and CRT Cable, Fingerprint Board and Bluetooth Card
Removing the USB and CRT Cable, Fingerprint Board and Bluetooth Card
Remove the USB board, fingerprint board and bluetooth board according to the following
procedures and Figures 4-20.
1. Remove USB cable from CN15 on the system board.
2. Remove the USB cable from base enclosure.
3. Remove one M2.5x4 flat round-head screw securing the CRT cable.
4. Remove CRT cable from CN10 on the system board.
5. Remove the CRT cable from base enclosure.
6. Remove two M2x3 flat head screws securing the fingerprint board.
7. Remove fingerprint SUMI-card from CN13 on the system board.
8. Remove the fingerprint board from base enclosure.
9. Remove Bluetooth cable from CN17 on the system board.
10. Remove the Bluetooth card from base enclosure.
CRT cable
M2x6 black
flat head screw
CN10
Figure 4-20 Removing the USB and CRT cable, fingerprint board and bluetooth
4-36
Satellite A210/A215/Satellite Pro A210/EQUIUM A210/SATEGO A210 Maintenance Manual
4.11 USB and CRT Cable, Finger Print Board and Bluetooth
M2 5x4 black flat head screw
.
Finger print SUMI card
M2x3 black flat head screw
CN13
CN15
CN17
USB cable
card
-
Blue tooth cable
Blue tooth card