Installing The Lcd Bezel Assembly - Toshiba NB300 Maintenance Manual

4 Replacement Procedures

Installing the LCD Bezel Assembly

Install the LCD bezel assembly according to the following procedures.
NOTE: Take extra care in routing cables and antennas on the LCD module. Improperly
routed cables can become pinched or damaged and cause malfunction.
1. Seat the LCD bezel assembly in the correct position.
2. Press the bezel hinge wall against the cover hinge wall. Press the left and right side of
the bezel as shown in Figure 4.49. Make sure the bezel clicks into place.
3. Secure it to the display assembly with two M2.5x5 screws.
4. Adhere the two screw rubbers to the screws.
NB300 Maintenance Manual
Error! Style not defined. Error! Style not defined.
4-50