Changing The Engine Oil Filter - Toro TimeCutter MX 4260 Operator's Manual

2. Disengage the PTO, move the motion control levers
to the neutral locked position and set the parking
brake.
3. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position (Figure 30).
1
3
5
2
4
6
G014971
Figure 30
4. Slowly pour approximately 80% of the specified oil
into the filler tube and slowly add the additional oil
to bring it to the Full mark (Figure 31).
1
3
5

Changing the Engine Oil Filter

Service Interval: Every 200 hours—Change the oil
filter. (more often in dusty, dirty
conditions)
Note: Change the engine oil filter more frequently
when operating conditions are extremely dusty or sandy.
1. Drain the oil from the engine; refer to Changing the
Engine Oil.
30
2
4
6
G008796
Figure 31