Starting The Engine - Toro TimeCutter MX 4260 Operator's Manual

Starting the Engine

1. Sit down on the seat and move the motion controls
outward to the park position.
2. Move the throttle control to fast (Figure 12).
3. Disengage the blades by moving the blade control
switch to Off (Figure 12)
Figure 12
1. Throttle
4. Pull up on the Choke control before starting a cold
engine (Figure 13).
Note: A warm or hot engine may not require
choking.
2. Blade control switch—Off
position
1. Control panel
2. Throttle
3. Fast
5. Turn the ignition key to Start to energize the starter.
When the engine starts, release the key (Figure 14).
Important: Do not engage the starter for more
than 10 seconds at a time. If the engine fails
to start, allow a 60 second cool-down period
between attempts. Failure to follow these
instructions can damage the starter motor.
18
g017699
Figure 13
4. Slow
5. Choke control