Pass-Through Configurations - AMX Infrared Emitter CC-IRC Product Manual

Pass-Through Configurations

This method allows IR signals generated from hand-held remotes to easily
pass through the opaque red shell/cover. The internal IR LED can be
oriented to either face towards or away from the shell (Figure 1),
depending on its output configuration. Use the low-output configuration
when device is being saturated by an IR signal. Use the high-output
configuration when the device isn't receiving enough of an IR signal and
requires more strength. The side with the round "bump" is the high-output
side.
Away from
IR window
Low-Output
Figure 1
High-Output
Towards
IR window
Adhesive