Table of Contents
Advertisement
INSERTING A MEMORY CARD
You can use SD Card with this digital camera. The memory card slot is located beneath the battery
cover, adjacent to the battery compartment.
1. Be sure that the camera is turned off.
2. Slide the battery cover and open it.
3. Insert the SD card as shown in the diagram.
4. Close the battery cover.
To remove the memory card, gently press on the edge of the card and release it. Pull the card out
and close the battery cover.
About Camera Memory
The digital camera is equipped with internal memory. If the memory card is not inserted in the camera,
all images and movie clips recorded by the camera will be stored in the internal memory. If the
memory card is inserted, images and movie clips are stored on the memory card.
DCF Protocol
The DCF protocol defines the format for image file data as well as
the directory structure for the memory card. Images that are taken
by a DCF camera can be viewed on DCF-compatible cameras
from other manufacturers.
SETTING THE DATE AND TIME
When the camera is first turned on, the date and time setting will
not be correct. So before using, be sure to set date and time.
1. Press the MENU button, using
and press the SET button.
2. Press
or
to select DATE & TIME (
the SET button to launch the Date & Time screen.
3. Press
or
tto change the value of the highlighted field.
Press
or
to highlight another field.
4. After adjusting the settings, press the SET or the MENU button
to apply the setting.
Note:
• If you hold down
• If the batteries are removed for about two days, the Date & Time setting will be lost. In this
case, make these settings again.
or
640
640
320
640
160
320
640
320
160
160
or
, you can change the value quickly.
320
640
640
160
320
320
160
160
640
640
320
to select SETUP (
) then press
or
640
320
160
640
640
320
320
160
160
6
GETTING STARTED
)
640
320
160
640
320
160
Advertisement
Table of Contents
