Playing A Slide Show; Copying The Files - Jenoptik 5.3z3 EasyShot User Manual

9. After you finished all image settings, press the MENU button to apply it.
Hint:
• To set the DPOF setting for all images in a time, select ALL in step 3 and press the SET
button.
• To reset all DPOF settings to initial default, select RESET in step 3 and press the SET button.

PLAYING A SLIDE SHOW

You can set the camera to display images in a slide show.
1. Set the camera to the Playback mode .
2. Press the MENU button, using
( ) and press the SET button.
3. Use the arrow button to set the playback interval (
repeat or not (
• You can set the interval between 1~10 seconds.
4. Press the SET button to start the slideshow, or press the MENU
button to cancel.
640
• During the slideshow, press the SET button to pause the slideshow and press the SET button
320
again to resume.
160
Note: The slideshow function is not available for the movie clips and voice recording.

COPYING THE FILES

You may want to copy the data from the camera's internal memory to the memory card for
convenience.
1. Be sure you had inserted a memory card to your digital camera.
2. Set the camera to the Playback mode .
3. Press the MENU button, using
( ) and press the SET button.
4. Press or to select SINGLE, then press the SET button.
5. Press or to select the image you want to copy to a card.
6. Press the SET button to start copy.
7. Repeat step 5~6 to copy other images.
8. Press the MENU button to complete the setting.
Hint: To copy all images to a memory card in a time, select ALL in step 4 and press the SET button.
or
).
or
640
640 320
160
320
640 640
160
320 320
160 160
to select SLIDE SHOW
) and
640 640
320 320
160 160
to select COPY TO CARD
640 640
320 320
160 160
24
PLAYBACK