Table of Contents
Advertisement
ADVANCE SETTINGS
CHOOSING A STARTUP IMAGE
You can choose a recorded image as the start-up image.
1. Set the camera to the Playback mode.
2. Press
or
to select a desired image.
3. Press the MENU button, then press
(
).
4. Press
or
to select an option, and then press the SET button.
640
5. Set the camera to the Setup Menu .
320
6. Press
or
to select S.IMAGE (
160
SET button.
7. Press
or
to select a desired image and press the SET or
the MENU button to apply the setting.
8. Press the MENU button to close the menu.
Note: The start-up image will not be deleted even if the original
image is deleted or memory formatted.
FORMATTING THE MEMORY
To erase all data stored in the memory card if you are using a card, or all data stored in the internal
memory if there is no card inserted.
1. Set the camera to the Setup Menu .
2. Press
or
to select FORMAT (
3. Press the SET button to start format, or press the MENU button to cancel it.
•
A "BUSY...PLEASE WAIT" message displays and the memory card is starting format.
•
A "COMPLETED" message displays when finish formatting.
640
Note: All data will be deleted including protected ones. Be sure to download important files to
320
your computer before formatting.
160
RESETTING TO DEFAULT SETTINGS
You can reset the entire menu and button operation settings to initial default.
1. Set the camera to the Setup Menu.
2. Press
or
to select RESET ALL (
3. Press
or
to select YES then press the SET button to reset all settings.
Note:
640
The following settings do not change with this procedure:
320
• Date & Time setting
160
• Language setting
• TV out setting
640
640
640
320
320
640
320
160
160
640
160
320
640
320
160
640
160
320
640
320
160
160
320
160
640
640
320
160
320
160
640
640
640
320
320
640
160
320
160
320
160
160
or
to select S.IMAGE
) then press
or the
640
640
320
320
160
160
) then press
or the SET button.
) then press
or the SET button to launch the submenu.
27
640
320
160
640
320
160
640
320
160
Advertisement
Table of Contents
