Table of Contents
Advertisement
RECORDING
Display
-
640
320
2
160
10
3. Shoot the image.
Each option automatically switches to single shot in the following situation:
•
After each shot.
•
When the mode switched.
•
When the camera is turned off.
Note: When using the self-timer function, be sure to use a tripod or place the digital camera on a
level, stable surface.
Using the Macro mode
Your camera is equipped with a macro function that allows you to focus on very close subjects.
In macro mode you can focus on subjects 10 cm from the lens when in the maximum wide angle
(zoomed out) setting and 80 cm in the maximum telephoto (zoomed in) setting.
1. Set the camera to the Record mode .
•
You can use the macro mode in still image shooting or movie
recording.
2. Press the
button to enter the macro mode.
•
The macro mode icon (
3. To leave the macro mode, press the
640
320
640
160
320
160
Note: Distances referred to measure the distance between the camera lens surface and the
subject.
Option
Single shot
2-SEC
10-SEC
Double
Burst
) appears on the LCD monitor.
button again.
640
320
160
Record a single image.
The shutter release will be delay for 2
seconds.
The shutter release will be delay for 10
seconds.
Record two images in a shot after
pressing the shutter release button 10 and
12 seconds.
For capturing 4 images in succession.
640
320
160
13
Description
Macro
Advertisement
Table of Contents
