Table of Contents
Advertisement
Using the Flash
Press the flash button cycles your camera through the various flash modes. A symbol appears on the
LCD screen to indicate the flash mode. The flash cannot be used when movie recording.
1. Set the camera to the Record mode.
•
The flash function only used in still image shooting.
2. Press the
button to change the flash mode:
Display
640
320
A
160
640
320
160
640
320
S
160
640
640
320
3. Shoot the image.
640
320
160
320
160
160
Note: The flash charging time may increase when the battery is low.
Using the Self-timer & Burst
Use the self-timer to set a delay from the time the shutter button is pressed to the time the image is
shot. Use the burst to record four continuous still images shooting.
1. Set the camera to the Record mode .
•
This function only used in still image shooting.
2. Press the
button to change the settings:
640
320
160
Option
Auto flash
Red eye reduction
Always on
Slow sync
Always off
Flash fires automatically when shooting
conditions require extra lighting.
Flash strobes to let the subject's eyes adjust
to the flash, then fires again to take the actual
image. The digital camera will detect the
subject brightness and use the flash only when
required.
Flash fires every time you take a photo,
regardless of lighting conditions.
Flash fires with a slow shutter speed.
The flash never fires even in dark situation.
Flash
12
RECORDING
Description
Self-timer
Flash
Advertisement
Table of Contents
