Function - Kenwood KDC-X592 Instruction Manual

Category Item Setting
M.RDM "ON"/ —
T.REP "ON"/ —
D.REP "ON"/ —
*Factory setting
* Function of KDC-X592.
Displayed item is depending on currently selected
source or mode. The mark in Condition column
shows the condition to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB/iPod.
: Can be set while Audio file source of CD/USB
(excluding iPod).
: Can be set while CD/ Disc changer source.
: Can be set while Disc changer source.
: Can be set during Tuner source.
: Can be set during FM reception.
: Can be set while accessing AUX source.
: Can be set while HD Radio source.
: Can be set during Satellite radio source.
: Can be set only during playback of the iPod source.
(USB source used when the iPod is connected)
: Can be set for sources other than the standby
source by setting "2 ZONE" of <Audio Setup> (page
16) to "ON".
: Refer to the reference page.
Å–Ï : Can be set when the specified type is selected for
Display Type.
— : Can be set during all sources.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• Only the items available to the current source are
displayed.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
Entry Setting overview
When set to "ON", plays the music in the disc changer
randomly.
When set to "ON", plays the music repeatedly.
When set to "ON", plays the music on the disc repeatedly.
1
Enter Function Control mode
Press the [FNC] button.
Function icon is displayed.
2
Select your desired setup item
Repeat selection and determination until your
desired setup item is selected.
Example:
3
Make a setting
Turn the Control knob to select a setting value,
and then press the Control knob.
Some items require you to keep pressing the
Control knob for 1 or 2 seconds so that you can
make a setting. For these items, the time during
which you need to keep pressing the Control knob
is displayed in the Entry column in seconds. For
the functions accompanied by the description of
the setting procedure and so forth, the reference
page numbers are displayed.
4
Exit Function Control mode
Press the [FNC] button for at least 1 second.
Operation type Operation
Movement between items Turn the Control knob.
Selection of item Press the Control knob.
Return to previous item Press the [FNC] button or "
MENU
MENU
Condition Page
" icon
DISP
DISP
TYPE
TEXT
7
|
English