CTC Union FRM220-1000ES-2F User Manual

Introduction
The FRM220-1000E Families are slide in fiber media converters available in a number of
different models that also act as line cards for placement in the FRM220 platform Media
converter chassis. The FRM220-CH01 are stand-alone cases for FRM220 slide-in cards with
built-in power supply features. The FRM220-1000ES-2F is a media converter with 2-port
1000Base-X SFP. The FRM220-1000E-2F is a media converter with fixed 2-port 1000Base-X.
The data transmission over optical fiber media converter depends on your specific network
needs
All media converters are available with either multi-mode or single-mode optical transceivers
and with connector SC or LC. In single mode, WDM ( Wave Division Multiplexing with SC or LC )
or "Bidi" are also available in 20, 40, 60km reach, which provide the ability to transmit and
receive data using only a single optical fiber. When the FRM220-1000E card is placed in the
FRM220 rack with SNMP management, the card status, type, and fiber link status can all be
displayed.
The Fiber media converters give you the freedom to extend your Gigabit Ethernet network
cabling distance by allowing connectivity up to 120 kilometers. LED indicators display the
status of the converters.
s a l e s @ c t c u . c o m
Panel
■ Figure #1. Upper Panel of FRM220-1000E(S)-2F
■ Figure #2 Stand-alone chassis options for FRM220-1000E(S)-2F
AC Jack
Power
Switch
DC Jack
1000E-DC12 1000E-AC 1000E-DC48
s a l e s @ c t c u . c o m
w w w . c t c u . c o m
1000ES-2F 1000E-2F
AC Jack
Power
Switch
Power Power
Switch Switch
DC DC
Terminal Terminal
1000E-AD
w w w . c t c u . c o m
CTC Union Technologies Co., Ltd.
w w w

User Guide

Gigabit Ethernet over Fiber Media Converter
FRM220-1000E(S)-2F
s a l e s @ c t c u . c o m

Specifications

Standards
IEEE802.3z 1000Base-SX/LX, Gigabit Standards
1000Base-FX Fiber Optic Connectors
1000ES-2F: Two SFP slot LC connector are provided for optic cable connection.
1000E-2F : Two SC connectors are provided for optic cable connection
Environment
Operating -- 0°C – 50°C
Storage -- 0°C – 70°C
Humidity -- 10 – 90% (non-condensing)
Power
Adapter: 12V DC 1A, Built-in AC Power 100~240 V, Built-in DC Power 18~72VDC
Dimensions: (W x D x H) mm
1000E-DC12 : 88 × 160 × 24 1000E-AC : 135 × 201 × 35
1000E-DC48 : 135 × 201 × 35 1000E-AD : 135 × 201 × 35
Application
CPE ( Stand-alone ) to CPE ( Stand-alone )
Ethernet
FRM220-1000ES-1+CH01 FRM220-1000E-2F+CH01
s a l e s @ c t c u . c o m
. c t c u . c o
Ethernet
FRM220-1000ES-1+CH01
w w w . c t c u . c o m
m