Konica Minolta Postscript Drivers - Konica Minolta magicolor 7300 Reference Manual

KONICA MINOLTA PostScript Drivers

KONICA MINOLTA PostScript Drivers are available from the Software Utilities
CD-ROM and from the Internet (www.konicaminolta.net/printer/). This
chapter includes instructions for manually installing the printer driver using
the Add Printer Wizard.
" #
To use the KONICA MINOLTA PostScript printer driver, SNMP must
be running and you must have Windows NT4 Service Pack 6 or higher
installed.
" #
Windows NT does not support Plug & Play. When you see the pop-up
menu to select where to install the driver from, select "Specify a
Location." Do not select "from CD-ROM" for the driver location.
on the setup.exe file in the root directory to start the Installer application.
After driver installation is complete, remove the Software Utilities CD-ROM
and store it in a safe place.
You also have the option to manually install the printer driver located on the
CD-ROM. See "Manually Installing the KONICA MINOLTA PostScript Driver
on Windows NT4" on page 54 for instructions.
" #
Efforts to enhance the features and performance of your
KONICA MINOLTA printer driver don't stop when you purchase our
product. We make every effort to bring you the very best, and as a
result, occasionally update the printer driver software. For the latest
printer driver, check your printer's Support page on our website at
www.konicaminolta.net/printer/.
52
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Installing from the CD-ROM
The Software Utilities CD-ROM has an automatic
printer driver installer program. Simply insert the
CD-ROM and follow the on-screen instructions for
driver installation.
The Installer application automatically runs on most
PCs. If your PC configuration prevents the Installer
from auto-running, browse to the CD and double-click
KONICA MINOLTA PostScript
Drivers