!
Implicit Language Selection—If the ENTER LANGUAGE command is
not used, the printer uses the language set as the default language. This
method works fine as long as the default language is the same language
as the job sent to the printer. If the PERSONALITY variable is set to
AUTO, and no ENTER command is received, Context Language
Selection (described next) is used instead of Implicit Language Selection.
!
Context Language Selection—When the printer is configured to
automatically select the language of incoming jobs and the ENTER
LANGUAGE command is not used to identify the job language, the printer
samples the incoming data and chooses a language based on its
interpretation of the sampled data.
288
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Language Configuration