Installing The Konica Minolta Crown Print Monitor - Konica Minolta magicolor 7300 Reference Manual

Installing the KONICA MINOLTA Crown
Print Monitor+
The KONICA MINOLTA Crown Print Monitor+ is on the Software Utilities
CD-ROM that comes with your printer and is also available from our Internet
website (www.konicaminolta.net/printer/).
1
Select the Manual radio button from the Add Crown Port dialog box.
" #
Auto Discovery
and Search for
Printers is not
supported for
magicolor 7300
printers.
2
Type the logical name for
the port in the Port Name
text box.
This is a descriptive
identifier of the port. Each
port name must be
unique. The maximum
port name is up to 128 characters. This name displays in the Print to: list
box of the Printer Properties dialog box in Print Manager.
If the port name already exists, the following message displays:
You must choose another Port Name.
" #
On initial access to the Add Port dialog box, whatever you type in
the Port Name text box is automatically copied to the IP Address
text box. The port name and IP address can be the same or they
can be different. However, if they are different, then first click the
cursor in the IP Address text box and type it. Then click the cursor
in the Port Name text box and type it.
102
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Installing the KONICA
MINOLTA Crown Print
Monitor+